If you want toProfiled Glass Cutting MachineThe service life is long, that daily maintenance is essential. So how should we go about maintaining the abnormity cutting machine? Nanjing ye Tuo Automation Equipment Co., Ltd. engaged in the production of profiled glass cutting machine for many years, today to introduce special-shaped cutting machine maintenance methods, I hope to help.

1, special-shaped glass cutting machine actively into the water tank, open the water tank, remove the water pump, eliminate the dust on the water pump. Clean the water tank, replace the circulating water, restore the pump back to the water tank, the water pipe to connect the water pump into the inlet, tidy up the joints. Power the pump on its own and run for 2-3 minutes.
2, abnormity glass cutting machine fan cleaning
Long-term application of the fan, will make the fan heap a lot of solid dust, let the fan attack very big noise, also not conducive to exhaust and odor. When there is a lack of smoke in the suction fan, the main closed power supply, the fan into the wind pipe and out of the wind pipe removed, remove the dust inside, and then the fan inverted, and pull the inside of the wind, until clean and clean, and then the fan installed.
3, special-shaped glass cutting machine lens cleaning
Laser glass cutting Machine lens center to the edge of the rotary wipe. The 3rd lens and the assembling mirror need to take out from the frame, use the same method to wipe, wipe is finished and put back.
Above, is Nanjing ye Tuo Automation Equipment Co., Ltd. for you to sum up about the special-shaped cutting machine maintenance of detailed introduction, we all understand it? More relevant special-shaped cutting machine expertise to welcome the attention of Nanjing ye Tuo Automation equipment Co., Ltd.!